Jump to content
Home Products Support & Downloads What's New Where to Buy
 

Custom Stripmaster® Repair Parts List

Cat. No. 45-169 thru 45-188


Please contact the factory for parts and repairs. Always include complete description, part number, and nameplate data.

Parts List
Item
# Reqd
Description
Part No.
1
1
Jaw Sub-Assembly*
*LB-1024†
2
2
Handle Sub-Assembly
I-6757RP†
3
2
Gripper Screw (#5-40 x 13/32 w/lockwasher)
355.002
4
1
Stationary Grit Gripper Pad 10-14 AWG
L-5215
4
1
Stationary Grit Gripper Pad 16-30 AWG
L-5217
5
1
Moveable Grit Gripper Pad
L-5212
6
1
Blade Retaining Plate
L-9040
7
1
Latch Pin
281.082†
8
1
Latch
L-8906
9
1
Latch Spring
L-4388
10
1
Latch Stud
L-8973
11
1
Pivot Stud
LB-909
12
1
Pivot Spring Cover
L-5093
13
1
Pivot Spring
L-5092
14
1
Pivot Stud Screw (#8-32 x 3/8, Nylok)
358.015
15
1
Handle Spring
L-4387
16
2
Blade Nut (#5-40, Keps Nut)
374.022
17
2
Handle Sleeve (Black)
LA-4070
17
2
Handle Sleeve (Red)
L-5345

Accessories available separately or with 45-180 thru 45-188
Item
# Reqd
Description
Part No.
19
1
Wire Stop Assembly (includes items 20-22)
L-5270
20
1
Wire Stop
L-5800
21
1
Stop Rod
L-8907
22
1
Thumb Head
1341.037
23
1
Short-Stop Latch Assembly (includes items 24-27)
L-5269
24
1
Latch
K-2272
25
1
Latch Pin
L-5273
26
1
Pivot Pin
L-5272
27
1
Spring
L-5271
28
1
Internal Spring (see repl Frame Assembly)
L-6029†
29
2
Internal Spring Pin
281.064†
* Jaw Sub-Assembly includes left and right jaws with items 7 thru 11.
† Note: For Internal Spring Frames use LB-1025 Jaw Sub Assembly.
I-6758 Handle Sub-Assembly, LB-075 Latch Pin and Items 28 and 29.


Replacement Blades
Wire
Gauge
Complete
Cat. No.
Complete w/Wire Stop
& Short-Stop Latch
Blade
Part No.
For General Purpose, Plastic, Fiberglass, etc.
10-14
45-170
45-180
L-5210
16-26
45-171
45-181
L-5211
26-30
45-172
45-182
L-5436
For Wire Wrapping (Thin Insulation) Solid Wire
24-30
45-169
--
L-9300
30 only
45-179
--
L-7625
For MIL-W-16878 Type EE 1000V TEFLON® Wire
10-14
45-173
45-183
L-5562
16-26
45-174
45-184
L-5563
26-30
45-175
45-185
L-5564
For MIL-W-16878 Type E 600V TEFLON® Wire
10-14
45-176
45-186
L-5559
16-26
45-177
45-187
L-5560
26-30
45-178
45-188
L-5561
*Reg. ™ DuPont.
Note: Contact factory for blade recommendation for other wire types including MIL-W-22759, MIL-W-81381, MIL-W-81044.

TEFLON® is a registered trademark of E.I. du Pont de Nemours and Company.

Replacement Gripper Pads
Surface
Type
Moveable Gripper
Stationary
Gripper (Thickness)
Gripper
Set
Grit*
L-5212
L-5215 (.129")
LB-197
Grit*
L-5212
L-5217 (.156")
LB-198
File
LB-718
LB-719 (.129")
LB-721
File
LB-718
LB-720 (.156")
LB-722
Parallel
LB-727
LB-728 (.129")
LB-730
Parallel
LB-727
LB-729 (.156")
LB-731
*Grit pads are standard for all products.
Note: For wire gauge 10-14, use .129" stationary gripper.
For 16-30 AWG, use .156" gripper.


Replacement Frame Asssemblies
Description
Frame Part #
Frame less blades, 10-14 AWG
L-5616
Frame less blades, 16-30 AWG
L-5617
Frame less blades, 10-14 AWG, Wire Stop and Latch
L-5618
Frame less blades, 16-30 AWG, Wire Stop and Latch
L-5619
Frame less blades, 16-30 AWG, Internal Spring (see note)
L-9038
Frame less blades, 10-14 AWG, Internal Spring (see note)
L-9039
Note: Frames with internal springs allow additional blade penetration pressure for difficult and multi-layered insulation types.



Caution
Never plug or mechanically gauge blade holes!


Operating Instructions



1. Insert wire between gripper jaws and position in proper blade hole.2. Squeeze handles firmly with wire centered in hole to cut insulation.3. Release pressure on handles and remove wire. Tool ready for next wire.
4. To ensure blade calibration, depress handles until blade surfaces mate. Tighten hex nuts (10 in./lbs). Sample strip. Repeat if necessary.

Maintenance
1. Keep tool clean and free from debris.
2. Insulation material may be removed by washing in cleaning solvent.
3. Apply a light oil to moving parts.


Follow Us: