Custom Stripmaster® Lite Repair Parts List

Cat. No. 45-631 thru 45-641 and 45-651 thru 45-661

Please contact the factory for parts and repairs. Always include complete description, part number, and name plate data.

Parts List

Item	# Reqd	Description	Part No.
1	1	Jaw Sub-Assembly	LB-1210
2	1	Handle L Hand	LB-0950
3	1	Handle R Hand	LB-0949
4	4	Gripper Screw (#5-40 x .312 w/Lockwasher)	LB-1350
5	1	Stationary Grit Gripper Pad, 16-30 AWG	LB-0883
6	1	Moveable Grit Gripper Pad	LB-0882
7	1	Guide Plate	LB-0891
8	1	Latch Catch, Stud	LB-0894
9	1	Latch	LB-0938
10	1	Latch Spring	LB-0944
11	1	Latch Stud	LB-0939
12	1	Pivot Stud	LB-0940
13	1	Spring Cover	LB-0941
14	1	Jaw Spring	LB-0943
15	1	Camgrip Screw	LB-0893
16	1	Handle Spring	LB-0942
17	2	Handle Sleeve (Black)	LA-4064
18	1	Blade Set (Paired)	See Table
19	1	Ext. Spring	L-6029
20	2	Ext. Spring Pin	281.064
21	1	Wire Stop	LB-0991
22	1	Stop Rod	LB-0993
23	1	Thumb Screw	1341.037
24	1	Short Stop Latch	K-6604
25	1	Short Stop Latch, Stud	LB-0963
26	1	Short Stop Latch, Spring	LB-0964
27	1	Wire Stop Assembly (Items 21-23)	LB-1195
28	1	Short Stop Latch Assembly (Items 24-26)	LB-1194
29	1	Short Stop Latch Stud	LB-1302

Custom Stripmaster® Lite and Die-Type Blades

Cat. #	Blade	Insulation Type	Wire Size+
			16	18	20	22	24	26	28	30
45-632	LB-912	Gen. Pur.	.062	.052	.042	.035
45-652*	LB-912	Gen. Pur.	.096	.086	.073	.0635
45-633	LB-913	Gen. Pur.			.042	.035	.0292	.022
45-653*	LB-913	Gen. Pur.			.073	.0635	.0595	.052
45-634	LB-914	Gen. Pur.					.0292	.024	.020	.016
45-654*	LB-914	Gen. Pur.					.0595	.043	.040	.037
45-635	LB-915	TEFLON® EE (1000V)	.061	.052	.042	.034
45-655	LB-915	Mil-W-16878	.089	.0785	.067	.0595
45-636	LB-916	TEFLON® EE (1000V)			.042	.034	.028	.023
45-656	LB-916	Mil-W-16878			.067	.0595	.055	.0465
45-637	LB-917	TEFLON® EE (1000V)					.028	.023	.019	.016
45-657*	LB-917	Mil-W-16878					.055	.0465	.043	.042
45-638	LB-918	TEFLON® EE (600V)	.061	.052	.042	.034
45-658	LB-918	Mil-W-16878	.081	.070	.0595	.052
45-639	LB-919	TEFLON® EE (600V)			.042	.034	.028	.023
45-659*	LB-919	Mil-W-16878			.0595	.052	.043	.039
45-640	LB-920	TEFLON® EE (600V)					.028	.023	.019	.016
45-660*	LB-920	Mil-W-16878					.043	.039	.035	.032
45-641	LB-921	Wire Wrap	(4 holes, same size)							.012
45-661*	LB-921	Solid								.030
45-631	LB-911	Wire Wrap	Solid Wire				.024	.018	.014	.012
45-651*	LB-911	Solid					.033	.025	.023	.019

*Series includes wire stop and short stop latch accessories
+Numerator = Cutter Diameter Inches ± .001
Denominator = Counterbore Diameter Inches ± .002
Contact IDEAL for blade recommendation for other wire types, including Mil-W-22759, Mil-W-81381, and Mil-W-81044.

TEFLON® is a registered trademark of E.I. du Pont de Nemours and Company.

Replacement Gripper Pads

Surface Type Stationary Gripper	Gripper Set	Moveable Gripper	Part #
Grit	LB-1188	LB-882	LB-883
File	LB-1189	LB-1184	LB-1185
Parallel	LB-1190	LB-1186	LB-1187

Caution
Never plug or mechanically gauge blade holes!

Operating Instructions

1. Insert wire between gripper jaws and position in proper blade hole.		2. Squeeze handles firmly with wire centered in hole to cut insulation.		3. Release pressure on handles and remove wire. Tool ready for next wire.
4. To ensure blade calibration, depress handles until blade surfaces mate. Tighten hex nuts (10 in./lbs). Sample strip. Repeat if necessary.

Maintenance

1. Keep tool clean and free from debris.
2. Insulation material may be removed by washing in cleaning solvent.
3. Apply a light oil to moving parts.

Free Application Engineering Service and special, made-to-order Custom Stripmaster® Lite and Stripmaster® Lite Wire Strippers are available.
Contact IDEAL for complete information