Velocity™ Cable Pulling Lubricant
- High cling factor
- Maximum friction reduction
- Specification grade
- Compatible with all popular cable types
- Temperature stable
- Environmentally safe - non-toxic, non-flamable and non-corrosive
- UL listed
- Non-combustible residue
| Available Sizes |
Cat. No. |
| 1 Qt. Squeeze Bottle |
31-276 |
| 1 Gal. Bucket |
31-277 |
| 5 Gal. Bucket |
31-278 |
| 55 Gal. Drum |
31-279 |
| 1 Quart Bag (12 bags per bucket) |
31-282 |
| 1/2 Gallon Bag (6 bags per bucket) |
31-283 |
PVC or LDPE-jacketed cable on PVC conduit at 200 lbs/ft (2.91 kN/m) normal pressure; coefficient of dynamic friction < .15 PVC or LDPE-jacketed cable on HDPE innerduct at 200 lbs/ft (2.9 kN/m) normal pressure; coefficient of dynamic friction
< .15 |
| Percent non-volital solids |
3.5 to 5.5% |
| Appearance |
Thick, cream colored gel material |
| Wax, grease and silicone content |
None |
| Temperature use range |
25° F to 140° F (-3.8° C to 60° C) |
| pH |
6.5 to 8.0 |
| Cable Compatibility |
No deleterious effects on physical or electrical properties of cable jackets. |
| Polyethylene stress cracking |
No stress cracking on LDPE cable jacket when tested by ASTM D1693. |
| Cling Factor |
Twelve inches (30 cm) of a one-inch (2.5 cm) diameter cable will hold at least 75 grams of lubricant for one minute whne held vertically (at 70° F/20° C) |
| Temperature stability |
No more than 20% change in Brookfield viscosity from 40° F to 100° F (5° C to 40° C). No phase-out after 5 freeze/thaw cycles or 24-hour exposure at 120° F (50° C). |
| Toxcicity |
Non-toxic and non-sensitizing. Industrial use only. |
| Cleanup |
Complete cleanup possible with water. |
| Flammability |
Lubricant has no flash point and dried residue is non-flamable. |
Pulling Length
in Feet |
Conduit ID in Inches |
|
1" |
2" |
3" |
4" |
| 50 |
0.075 |
0.15 |
0.225 |
0.3 |
| 100 |
0.15 |
0.3 |
0.45 |
0.6 |
| 150 |
0.225 |
0.45 |
0.675 |
0.9 |
| 200 |
0.3 |
0.6 |
0.9 |
1.2 |
| 250 |
0.375 |
0.75 |
1.125 |
1.5 |
| 300 |
0.45 |
0.9 |
1.35 |
1.8 |
| 350 |
0.525 |
1.05 |
1.575 |
2.1 |
| 400 |
0.6 |
1.2 |
1.8 |
2.4 |
| 450 |
0.675 |
1.35 |
2.025 |
2.7 |
| 500 |
0.75 |
1.5 |
2.25 |
3 |
| 550 |
0.825 |
1.65 |
2.475 |
3.3 |
| 600 |
0.9 |
1.8 |
2.7 |
3.6 |
| 650 |
0.975 |
1.95 |
2.95 |
3.9 |
| 700 |
1.05 |
2.1 |
3.5 |
4.2 |
| 750 |
1.125 |
2.25 |
3.375 |
4.5 |
| 800 |
1.2 |
2.4 |
3.6 |
4.8 |
| 850 |
1.275 |
2.55 |
3.825 |
5.1 |
| 900 |
1.35 |
2.7 |
4.05 |
5.4 |
| 950 |
1.425 |
2.85 |
4.275 |
5.7 |
| 1000 |
1.5 |
3 |
4.5 |
6 |
| 1050 |
1.575 |
3.15 |
4.725 |
6.3 |
| 1100 |
1.65 |
3.3 |
4.95 |
6.6 |
| 1150 |
1.725 |
3.45 |
5.175 |
6.9 |
| 1200 |
1.8 |
3.6 |
5.4 |
7.2 |
Increase quantities for the following conditions
- Stiff, heavy cable
- Rough, old or dirty conduit
- High percentage conduit fill
- High temperatures
- Pulls with several bends
