Jump to content
Home Products Support & Downloads What's New Where to Buy
 

Hand Held Resurfucers

Small Motor-Type Resurfacer

Small Motor-Type Resurfacer

Product Resources

Documentation

Features

  • Different grades of stone on each end
  • Designed for use on small fractional horsepower motors
  • 10 inch handle
  • Available in five two-grade combinations
  • A = Medium/Finish
  • B = Course/Finish
  • D = Finish/Polish
  • G = Course/Medium
  • H = Medium/Polish
Size (Inches) Grades Cat.No.
3/4 x 1/2 x 3/8 A, B, D, G, H 80-012*
  • * Add grade letter suffix to Cat. No. when ordering

Pencil-Type Resurfacer

Pencil-Type Resurfacer

Product Resources

Documentation

Features

  • For use on fans, signal motors, auto generators, locomotive headlight motors and other fractional horsepower motors
  • Available in five grades
  • X = Extra Course - very fast cutting, for "hogging" off excess copper
  • C = Course - fast cutting
  • M = Medium - for general use, high mica, small ridges and burns
  • F = Finish - for use after the three grades above, for periodic application and for removing small burns and ridges immediately after their appearance
  • P = Polish - very fine grade for burnish finish
Size (Inches) Grades Cat.No.
5/8 x 3/8 x 6 X, C, M, F, P 80-075*
  • * Add grade letter suffix to Cat. No. when ordering

Straight Handle Resurfacer

Straight Handle Resurfacer

Product Resources

Documentation

Features

  • For use in hard to reach commutators on small or enclosed motors
  • 10 inch handle
  • Available in four grades
  • C = Course - fast cutting
  • M = Medium - for general use, high mica, small ridges and burns
  • F = Finish - for use after the three grades above, for periodic application and for removing small burns and ridges immediately after their appearance
  • P = Polish - very fine grade for burnish finish
Size (Inches) Grades

Cat.No.
1 x 1 x 1 C, M, F, P 80-155*
  • * Add grade letter suffix to Cat. No. when ordering

Tramway Handle Resurfacer

Tramway Handle Resurfacer

Product Resources

Documentation

Features

  • Handle shaped to ensure secure grip
  • 10-1/2 inch handle permanently mounted at 45 degree angle
  • Available in five grades
  • X = Extra Course - very fast cutting, for "hogging" off excess copper
  • C = Course - fast cutting
  • M = Medium - for general use, high mica, small ridges and burns
  • F = Finish - for use after the three grades above, for periodic application and for removing small burns and ridges immediately after their appearance
  • P = Polish - very fine grade for burnish finish
Size (Inches) Grades Cat.No.
2 x 1-1/2 x 2 C, M, F, P 80-255*
2 x 2 x 2 80-265*
3 x 2 x 2 80-274*
3 x 3 x 2 80-284*
4 x 3 x 2 80-293*
  • * Add grade letter suffix to Cat. No. when ordering

Commutator Smoothie Resuracing Tool

Commutator Smoothie Resuracing Tool

Product Resources

Documentation

Features

  • Designed to smooth commutators of auto generators, starting motors and other similar equipment
  • 8-1/2 inch plastic handle with a 5/16 x 7/8 x 11/16 inch resurfacer on each end
  • Features one polish-grade and one finish-grade resurfacer
  • Bent handle reaches into any motor frame
  • Non-conductive for user safety
Description Cat.No.
Commutator Smoothie Resurfacing Tool 80-033
Follow Us: